Intelligent suspension system control unit - R.R.
- Make
- Lancia
- Model
- Thesis Factory Service Manual
- Year
- 2002–2009
- Section
- Intelligent suspension › Intelligent suspension system control unit - R.R.
‹ Prev Rear suspension axle - r.r.Next › Front intelligent suspension SHOCK ABSORBER (one) - Includes dismantling/reassembly at the bench - R.R.
Suspension and wheelsIntelligent suspension system control unit - R.R.
Intelligent suspension system control unit - R.R.
Removing
- Disconnect the negative battery terminal.
1. Release and remove the front carpet, passenger side.
1. Release the electronic control unit access cover, passenger side.
1. Undo the fixing nuts (1a) and disconnect the electrical connector (1b).
| Description | Connector | |
|---|---|---|
| 1b | Controlled suspension control unit (SCS) | M046 |
Refitting
- Connect the electrical connector for the suspension control unit and place it in its housing.
| Description | Connector | |
|---|---|---|
| Controlled suspension control unit (SCS) | M046 |
- Tighten the nuts fixing the controlled suspension control unit.
- Reposition the electronic control unit access cover, passenger side.
- Reposition the front carpet, passenger side.
- Connect the negative battery terminal.
‹ Prev Rear suspension axle - r.r.Next › Front intelligent suspension SHOCK ABSORBER (one) - Includes dismantling/reassembly at the bench - R.R.
Parts & tools for this job For 2002 Lancia Thesis
- TOOLCoil spring compressorSearch: coil spring compressor
- TOOLBall joint separatorSearch: ball joint separator
- PARTShock absorbersSearch: Lancia Thesis 2002 shock absorbers
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.