Rear seat cushion ribbing - r r

Operation 7050A56 · Rear seat assembly

Removing

- 7050A20 one-piece rear seat cushion - r r

1. Fold the cushion over and release the edge (1a) of the cushion cover from the perimeter retainers (1b).

2. Release the hooks (2a) for the rods for the edge of the cover from the seats (2b).

3. Release the edge of the cushion from the remaining hooks.

4. Remove the cover and upholstery (4a) from the frame (4b).

1. If necessary, release the retainers (1a) for the bushes (1b) and remove the cushion retaining clips (1c).

Refitting

Check that the frame is not damaged.

If removed, position the retaining clips and attach the bush retainers.

Position the cushion on the upholstery attaching the edge using the hooks and the retainers.

- 7050A20 one-piece rear seat cushion - r r