R.r. front side door
- Make
- Lancia
- Model
- Ypsilon Factory Service Manual
- Year
- 2003–2011
- Section
- Removing refitting › R.r. front side door
‹ Prev R.r. roof/side panel - moulding connector profileNext › R.r. underdoor side member outer trim/
Body panels and frameR.r. front side door
R.R. FRONT SIDE DOOR
Removing
1. Undo the bolt (1a) which secures the door check strap (1b) to the door pillar and close the door to push the check strap back in.
2. Disconnect the electrical connection.
| Name | Connector | |
|---|---|---|
| 2 | Rear coupling for /front door. driver's side | D30 |
| Name | Connector | |
|---|---|---|
| 2 | Front passenger door/ rear coupling. | D31 |
3. Undo the hinge bolts.
4. Lift the doodr and remove it.
Refitting
Refit the door on the hinges.
Tighten the hinge bolts.
| Fastening | Component | Ø | Value (daNm) | |
|---|---|---|---|---|
| Bolt | SIDE DOORS | M6 | 1.5 |
Connect the electrical connection.
Check the various appliances on the door are working properly.
Make the check strap come out and tighten the bolts.
| Fastening | Component | Ø | Value (daNm) | |
|---|---|---|---|---|
| Bolt | FRONT DOOR OPENING LIMITER | M6 | 1.5 |
Check the door alignment and, if necessary, - 7005A14 front side door - adjust centering and moulding - includes adaptation of hinges and seals on door compartment.
‹ Prev R.r. roof/side panel - moulding connector profileNext › R.r. underdoor side member outer trim/
Parts & tools for this job For 2003 Lancia Ypsilon
- TOOLTrim removal tool kitSearch: trim removal tool kit
- PARTTouch-up paintSearch: Lancia touch up paint
- PARTPanel clip assortmentSearch: Lancia panel clips assortment
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.