Engine oil drain plug - replace

Operation 1020A30 · Crank case oil sump

1.2 8v

Removing

Position the vehicle on the ramp.

1. Undo the engine oil drain plug and drain the oil into a suitable container.

Do not disperse the oil into the environment, as indiscriminate dispersal of this product causes pollution.

1.2 16v

Removing

Position the vehicle on the ramp.

1. Undo the engine oil drain plug and drain the oil into a suitable container.

Do not disperse the oil into the environment, as indiscriminate dispersal of this product causes pollution.

1.4 16v

Removing

Position the vehicle on the ramp.

1. Undo the engine oil drain plug and drain the oil into a suitable container.

Do not disperse the oil into the environment, as indiscriminate dispersal of this product causes pollution.

1.3 JTD

Removing

Position the vehicle on the ramp.

Proceed with removal.

1. Undo the engine oil drain plug and drain the oil into a suitable container.

Do not disperse the oil into the environment, as indiscriminate dispersal of this product causes pollution.

1.2 8v

Refitting

Tighten the new engine oil drain plug to the recommended torque.

Refill the engine oil lubrication system - 0010T11 engine oil check level and top up.

Remove the car from the ramps.

1.2 16v

Refitting

Tighten the new engine oil drain plug to the recommended torque.

Refill the engine oil lubrication system - 0010T11 engine oil check level and top up.

Remove the car from the ramps.

1.4 16v

Refitting

Tighten the new engine oil drain plug to the recommended torque.

Refill the engine oil lubrication system - 0010T11 engine oil check level and top up.

Remove the car from the ramps.

1.3 JTD

Refitting

Tighten the new engine oil drain plug to the recommended torque.

Refill the engine oil lubrication system - 0010T11 engine oil check level and top up.

Proceed with refitting.

Remove the car from the ramps.