Front crank shaft cover oil seal - replace

Operation 1020D18 · Oil seals on crank shaft

1.2 8v

Removing

Position the vehicle on the ramp.

Proceed with removal - 4450B04 right front wheel r r.

Proceed with removal - 7055B66 Engine compartment DUST SHIELD protection in right front wheel arch - R.R..

Proceed with removal - 7055B91 Right front WHEEL ARCH LINER - R.R..

Proceed with removal - 1008B10 power unit front mount (timing side) flexible block - replace.

Proceed with removal - 1008A46 cam shaft left rigid mount - r r.

Proceed with removal - 1032D12 timing system protective cover(s) - r + r.

Proceed with removal - 1092B40 air conditioner compressor/alternator drive belt - r + r.

Proceed with removal - 1092A10 Crankshaft services PULLEY - R.R..

Proceed with removal - 1032B10 toothed timing belt - r + r for timing adjustment or replacement.

Proceed with removal - 1032B44 toothed drive pulley - r + r with timing belt removed.

1. Remove the crankshaft front cover oil seal.

Take care not to damage the oil seal seat during removal.

1.2 16v

Removing

Proceed with removal - 4450B04 right front wheel r r.

Proceed with removal - 7055B66 Engine compartment DUST SHIELD protection in right front wheel arch - R.R..

Proceed with removal - 7055B91 Right front WHEEL ARCH LINER - R.R..

Proceed with removal - 1092B40 air conditioner compressor/alternator drive belt - r + r.

Proceed with the removal.

Proceed with removal - 1048A10 air cleaner filtering element - replace.

Proceed with removal - 1056B60 single fuel manifold pipe, with injectors - r + r.

Proceed with removal - 1032B10 toothed timing belt - r + r for timing adjustment or replacement.

Proceed with removal - 1032B44 toothed drive pulley - r + r with timing belt removed.

1. Remove the crankshaft front cover oil seal.

Take care not to damage the oil seal seat during removal.

1.4 16v

Removing

Proceed with removal - 4450B04 right front wheel r r.

Proceed with removal - 7055B66 Engine compartment DUST SHIELD protection in right front wheel arch - R.R..

Proceed with removal - 7055B91 Right front WHEEL ARCH LINER - R.R..

Proceed with removal - 1092B40 air conditioner compressor/alternator drive belt - r + r.

Proceed with the removal.

Proceed with removal - 1048A10 air cleaner filtering element - replace.

Proceed with removal - 1056B60 single fuel manifold pipe, with injectors - r + r.

Proceed with removal - 1032B10 toothed timing belt - r + r for timing adjustment or replacement.

Proceed with removal - 1032B44 toothed drive pulley - r + r with timing belt removed.

1. Remove the crankshaft front cover oil seal.

Take care not to damage the oil seal seat during removal.

1.2 8v

Refitting

1. Fit a new crankshaft front oil seal (1a) using he tool (1b).

1.2 16v

Refitting

1. Fit a new crankshaft front oil seal (1a) using he tool (1b).

1.4 16v

Refitting

1. Fit a new crankshaft front oil seal (1a) using he tool (1b).

1.2 8v

Proceed with refitting - 1032B44 toothed drive pulley - r + r with timing belt removed.

Proceed with refitting - 1032B10 toothed timing belt - r + r for timing adjustment or replacement.

Proceed with refitting - 1092A10 Crankshaft services PULLEY - R.R..

Proceed with refitting - 1092B40 air conditioner compressor/alternator drive belt - r + r.

Proceed with refitting - 1032D12 timing system protective cover(s) - r + r.

Proceed with refitting - 1008A46 cam shaft left rigid mount - r r.

Proceed with refitting - 1008B10 power unit front mount (timing side) flexible block - replace.

Proceed with refitting - 7055B91 Right front WHEEL ARCH LINER - R.R..

Proceed with refitting - 7055B66 Engine compartment DUST SHIELD protection in right front wheel arch - R.R..

Proceed with refitting - 4450B04 right front wheel r r.

Refill the engine oil lubrication system - 0010T11 engine oil check level and top up.

Refill the engine cooling system with coolant - 0010T20 coolant change.

Remove the car from the ramps.

1.2 16v

Proceed with refitting - 1032B44 toothed drive pulley - r + r with timing belt removed.

Proceed with refitting - 1032B10 toothed timing belt - r + r for timing adjustment or replacement.

Proceed with refitting - 1056B60 single fuel manifold pipe, with injectors - r + r.

Proceed with refitting - 1048A10 air cleaner filtering element - replace.

Proceed with the refitting.

Proceed with refitting - 1092B40 air conditioner compressor/alternator drive belt - r + r.

Proceed with refitting - 7055B91 Right front WHEEL ARCH LINER - R.R..

Proceed with refitting - 7055B66 Engine compartment DUST SHIELD protection in right front wheel arch - R.R..

Proceed with refitting - 4450B04 right front wheel r r.

1.4 16v

Proceed with refitting - 1032B44 toothed drive pulley - r + r with timing belt removed.

Proceed with refitting - 1032B10 toothed timing belt - r + r for timing adjustment or replacement.

Proceed with refitting - 1056B60 single fuel manifold pipe, with injectors - r + r.

Proceed with refitting - 1048A10 air cleaner filtering element - replace.

Proceed with the refitting.

Proceed with refitting - 1092B40 air conditioner compressor/alternator drive belt - r + r.

Proceed with refitting - 7055B91 Right front WHEEL ARCH LINER - R.R..

Proceed with refitting - 7055B66 Engine compartment DUST SHIELD protection in right front wheel arch - R.R..

Proceed with refitting - 4450B04 right front wheel r r.