Timing angles
- Make
- Lancia
- Model
- Ypsilon Factory Service Manual
- Year
- 2003–2011
- Section
- Engine › Timing angles
SpecificationsTiming angles
TIMING ANGLES
| 1242 8V | 1242 16V | 1368 16V | 1248 JTD | ||
|---|---|---|---|---|---|
| Operating check clearance (mm) | Inlet | 0.35±0.05 | -(*) | -(*) | -(*) |
| Exhaust | 0.45±0.05 | -(*) | -(*) | -(*) | |
| Timing adjustment check clearance (mm) | Inlet | 0.70 | 0.45 | 0.45 | 0.50 |
| Exhaust | 0.70 | 0.45 | 0.45 | 0.50 | |
| Inlet | Opening (before TDC) | -2° 30' | 0° | -2° | -12° |
| Opens (after TDC | |||||
| Closes (after BDC | 36° 30' | 32° | 42° | 6° | |
| Exhaust | Opens (before BDC) | 36° 30' | 32° | 34° | 40° |
| Closes (before TDC) | |||||
| Closes (after TDC | -2° 30' | 0° | -2° | -12° |
(*) Hydraulic tappets
Parts & tools for this job For 2003 Lancia Ypsilon
- PARTEngine gasket setSearch: Lancia Ypsilon 2003 engine gasket set
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLFeeler gauge setSearch: feeler gauge set
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.