4410 front suspension
- Make
- Lancia
- Model
- Ypsilon Factory Service Manual
- Year
- 2003–2011
- Section
- 44 suspension and wheels › 4410 front suspension
Tightening torques4410 front suspension
4410 FRONT SUSPENSION
| Component | Fastening | Ø | Value (daNm) | Validity |
|---|---|---|---|---|
| ENGINE OR ROD ANCHORAGE BEAM | Rear bolt | M12 | (Bodyshell side) 11.4 ÷ 12.6 | |
| ENGINE OR ROD ANCHORAGE BEAM | Side bolt | M12 | (Bodyshell side) 10.5 ÷11.6 | |
| FRONT ANTI-ROLL BAR | Bolt | M8 | (Front suspension crossmember side) 3.2 ÷ 3.9 | |
| FRONT ANTI-ROLL BAR | Bolt | M8 | (Lower track control arm side) 3.2 ÷ 3.9 | |
| FRONT DAMPER | Bolt | M10 | (ore) 7.1 ÷ 7.9 | 1.3 JTD |
| FRONT DAMPER | Nut | M12 | (Upper mounting side) 3.6 ÷ 5.4 | |
| FRONT DAMPER | Nut | M12 | (Upper mounting side) 5.6 ÷ 6.2 | |
| FRONT SUSPENSION LOWER LEVER | Bolt | M10 | (Hub steering knuckle side) 5.9 ÷ 7.2 | |
| FRONT SUSPENSION LOWER LEVER | Bolt | M12 | (Front suspension crossmember side) 8.6 ÷ 9.5 | |
| FRONT SUSPENSION LOWER LEVER | Bolt | M12 | (Front suspension crossmember side) 10.5 ÷ 11.6 | |
| STEERING LINK | Nut | M10 | 3.6 ÷ 4.4 | 1.2 16v 1.2 8v 1.4 16v |
Parts & tools for this job For 2003 Lancia Ypsilon
- TOOLCoil spring compressorSearch: coil spring compressor
- TOOLBall joint separatorSearch: ball joint separator
- PARTFront shock absorbersSearch: Lancia Ypsilon 2003 front shock absorbers
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.