4450 wheels and hubs
- Make
- Lancia
- Model
- Ypsilon Factory Service Manual
- Year
- 2003–2011
- Section
- 44 suspension and wheels › 4450 wheels and hubs
Tightening torques4450 wheels and hubs
4450 WHEELS AND HUBS
| Component | Fastening | Ø | Value (daNm) | Validity |
|---|---|---|---|---|
| ADJUSTABLE STEERING LINKS | Nut | M10 | (Steering knuckle side) 3.6 ÷ 4.4 | 1.2 16v 1.2 8v 1.4 16v |
| ALLOY WHEELS | Bolt | M12 | 8.8 ÷ 10.8 | |
| ALLOY WHEELS | Bolt | M12 | 7.7 ÷ 9.5 | |
| FRONT HUB STEERING KNUCKLE. | Bolt | M10 | (Shock absorber side) 6.2 ÷ 6.8 | 1.2 16v 1.2 8v 1.4 16v |
| FRONT HUB STEERING KNUCKLE. | Bolt | M10 | 6.2 ÷ 6.8 | 1.2 16v 1.2 8v 1.4 16v |
| FRONT HUB STEERING KNUCKLE. | Bolt | M10 | (Shock absorber side) 7.1 ÷ 7.9 | 1.2 16v 1.2 8v 1.3 JTD 1.4 16v |
| FRONT HUB WITH BEARINGS | Nut | M24 | 1.3 JTD | |
| FRONT HUB WITH BEARINGS | Nut | M22 | (Driveshaft side) 6.6 ÷ 7.3 + 55˚ ± 2 | |
| GEAR CASING PADS | Drain plug | M16 | (Differential side) 1.6 ÷ 2.0 | 1.2 16v 1.2 8v 1.4 16v |
| REAR KNUCKLE | Bolt | M8 | (Rear brake assembly side) 2.3 ÷ 2.8 | |
| REAR KNUCKLE | Nut | M10 | (Axle side) 5.4 ÷ 6.6 | |
| REAR WHEEL HUB WITH BEARINGS | Nut | M22 | 26.6 ÷ 29.4 |
Parts & tools for this job For 2003 Lancia Ypsilon
- PARTWheel bearingSearch: Lancia Ypsilon 2003 wheel bearing
- TOOLBearing puller kitSearch: wheel bearing puller kit
- PARTCV boot kitSearch: Lancia Ypsilon 2003 cv boot kit
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.