Torque values
- Make
- Land Rover
- Model
- Defender V8i Workshop Manual Supplement
- Section
- Specifications, torque › Torque values
Automatic gearboxTorque values
TORQUE VALUES
Nm
| Coupling shaft to mainshaft | 42* |
| Filler tube to sump | 70 |
| Gear change lever to gearbox | 25 |
| Cooler pipe adaptor to gearbox | 42 |
| Securing screws - clutch F | 10 |
| Securing screw - parking pawl | 10 |
| Securing screws - pump | 10 |
| Intermediate plate plugs (M20) | 50 |
| Intermediate plate plugs (M14) | 40 |
| Bell housing mounting bolts | 46 |
| Governor mounting screws | 10 |
| Extension housing bolts | 23 |
| Control unit mounting bolts | 8 |
| Drain plug - fluid pan | 43 |
| Mounting screws for fluid pan | 8 |
| Drive plate to converter | 45* |
| Gearbox to engine | 42 |
| Strut (threaded end) | 42 |
| Bottom cover to converter housing | 9 |
| Cover - converter housing | 9 |
| Drive plates to crankshaft adaptor | 40* |
| Adaptor to crankshaft | 84 |
| Fluid screen bolts | 8 |
| Pump housing to intermediate pipe | 10 |
| Propeller shaft nuts | 47 |
lbf.ft
30* 52 18 30 7 7 7 35 30 34 7 17 6 22 6 33* 31 31 7 7 30* 62 6 7 35
NOTE: * These bolts MUST have threads coated with Loctite 270 prior to assembly.
Torque values below are for all screws and bolts used except for those that are specified otherwise.
METRIC Nm
| M5 | 6 |
| M6 | 9 |
| M8 | 25 |
| M10 | 45 |
| M12 | 90 |
| M14 | 105 |
| M16 | 180 |
UNC / UNF Nm
| 1/4 | 9 |
| 5/16 | 24 |
| 3/8 | 39 |
| 7/16 | 78 |
| 1/2 | 90 |
| 5/8 | 136 |
lbf.ft
5 7 18 33 65 75 130
lbf.ft
7 18 28 58 65 100
Parts & tools for this job For Land Rover Defender
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.