Discovery II
ENGINE - V8
REPAIRS 12-2-41
Gasket - timing gear cover
$% 12.65.04
Remove
1. Remove oil pick-up strainer.
ENGINE - V8, REPAIRS, Strainer -
2. Remove timing gear cover oil seal.
ENGINE - V8, REPAIRS, Seal - cover
3. Remove engine oil filter.
ENGINE - V8, REPAIRS, Filter - oil.
4. Remove and discard 3 bolts securing coolant
pump pulley and remove pulley.
5. Remove 3 bolts securing PAS pump pulley and
remove pulley.
6. Drain cooling system.
ADJUSTMENTS, Drain and refill.
7. Release clip and disconnect coolant hose from
coolant pump.
8. Disconnect multiplug from oil pressure switch.
9. Disconnect multiplug from CMP sensor.
10. If fitted: Loosen union and disconnect oil
cooler pipe from timing gear cover. Remove
and discard 'O' ring.
CAUTION: Always fit plugs to open
connections to prevent contamination.
11. Remove 9 bolts securing timing gear cover and
remove cover. Remove and discard gasket.