Discovery II
ENGINE - V8
REPAIRS 12-2-43
Seal - cover - timing gears
$% 12.65.05
Remove
1. Remove auxiliary drive belt.
REPAIRS, Belt - auxiliary drive.
2. Secure tool LRT-12-080 to crankshaft pulley
with 2 bolts.
3. Remove crankshaft pulley bolt.
4. Remove crankshaft pulley.
5. Use tool LRT-12-088, to remove oil seal from
timing gear cover.
Refit
1. Clean seal register in timing gear cover and
crankshaft pulley.
CAUTION: Seal is pre-greased, do not apply
additional lubricant.
2. Apply smear of Retinax LX grease to seal
running surface on crankshaft.
3. Fit seal to timing gear cover using tool LRT-12-
089 .
4. Fit crankshaft pulley bolt and tighten to 270 Nm
(200 lbf.ft).
5. Remove tool LRT-12-080 from crankshaft
pulley.
6. Fit auxiliary drive belt.