Discovery II
SEATS
76-5-20 REPAIRS
Cover - cushion - front seat
$% 78.30.01/81
Remove
1. Remove front seat.
2. Place seat on a suitable work bench.
3. Remove 2 screws securing outer edge trim
casing to seat frame.
4. Remove trim casing.
5. Release inner edge trim casing from seat
frame.
6. Remove trim casing.
7. Position seat upside down on table.
8. Release clip securing front edge of cushion
cover to seat frame.
9. Release clips securing side edges of cushion
cover to seat frame.
10. Release clip securing lower edge of squab
cover to seat frame.
11. Remove 2 end clips securing rear edge of
cushion cover to seat frame.
12. Release main central clip securing rear edge of
cushion cover to seat frame.
13. Models with seat heaters: Disconnect seat
heater multiplug.
14. Release bonded rear edge of cushion from
seat frame.
15. Remove seat cushion and cover assembly.
16. Release outer edges of cover from cushion to
gain access to hog rings.
17. Remove 12 hog rings securing cover to
cushion.
18. Remove cover.