300Tdi Discovery
CRUISE CONTROL
3
REPAIR
5. Disconnect 2 Lucars from horn contacts.
6. Remove 2 screws securing cruise control switch
to steering wheel.
7. Remove 3 bolts securing mounting bracket to
steering wheel and remove mounting bracket.
8. Remove cruise control switch from steering
wheel.
Refit
9. Reverse removal procedure. Ensuring wiring
harness is routed correctly.
10. Models fitted with airbags: Refit driver’s airbag
module and follow all safety precautions.
See
SUPPLEMENTARY RESTRAINT SYSTEM,
Repair, Driver’s Airbag Module
ROTARY COUPLER
Service repair no - 19.75.54
The rotary coupler is located behind the steering
wheel. Access is gained by removing the steering
wheel and steering column shroud.
NOTE: On vehicles fitted with airbags.
See
SUPPLEMENTARY RESTRAINT SYSTEM,
Repair, Rotary Coupler
Remove
1. Disconnect battery negative lead.
2. Remove steering wheel.
See STEERING,
Repair, Steering Wheel
3. Release 2 turnbuckles securing lower dash
closing panel and lower.
4. Remove 3 screws securing lower half of shroud
to steering column.
5. Disconnect rotary coupler multiplug from
steering column harness.