300Tdi Discovery
MFI
5
REPAIR
INERTIA FUEL SHUTOFF SWITCH
Service repair no - 18.30.35
The inertia fuel shutoff switch is located on the
bulkhead next to the washer reservoir under bonnet
[hood].
Remove
1. Disconnect battery negative lead.
2. Disconnect multiplug from inertia switch.
3. Remove 2 screws securing inertia switch to
mounting bracket.
4. Remove inertia switch.
Refit
5. Position inertia switch to mounting bracket and
secure with screws.
6. Connect multiplug to inertia switch.
7. Reconnect battery negative lead.
ENGINE FUEL TEMPERATURE SENSOR
Service repair no - 19.22.08
Remove
NOTE: Fuel leakage will not occur when
sensor is removed from fuel rail, therefore
it is not necessary to depressurise the fuel
system.
1. Disconnect battery negative lead.
2. Disconnect multi-plug from sensor.
3. Release sensor from fuel feed rail.
Refit
4. Reverse removal procedure. Ensure sensor is
tightened securely in fuel rail.
