300Tdi Discovery
SFI
21
REPAIR
ADD: 09/95
5. Fold back loadspace carpet and sound
insulation to reveal access panel.
6. Remove 6 screws securing fuel pump access
panel.
7. Remove access panel.
8. Disconnect multiplugs from fuel pump and
pressure sensor
9. Noting their fitted positions, disconnect both fuel
connections by pressing the black release
latches on each connector and pushing the
connector back down the line.
10. Care must be taken to catch any excess fuel
which may spill from the fuel lines once
removed.
11. Raise rear of vehicle.
WARNING: Support on safety stands.
