300Tdi Discovery
Tdi
7
REPAIR
9. Move intercooler upwards and clear of fan cowl.
Refit
10. Ensure locatiing lug grommets are fitted and in
good condition.
11. Ensure foam pad is in good condition and
attached to intercooler.
12. Move intercooler into position.
13. Reverse removal procedure.
GLOW PLUGS
Service repair no - 19.60.31
Remove
1. Disconnect battery negative lead.
No.1 glow plug - air conditioning models
2. Release drive belt from compressor pulley.
See
ENGINE, Repair, Drive Belt Renew
3. Remove 4 bolts securing compressor to front
cover, move compressor aside.
No.3 glow plug
4. Remove bolt securing Hummel valve, withdraw
valve, remove and discard ’O’ ring.