300Tdi Discovery
SUPPLEMENTARY RESTRAINT SYSTEM
17
REPAIR
9. Press both operating buttons to deploy airbag
module.
10. DO NOT return to airbag module for 30 minutes.
11. Using gloves and face mask, remove airbag
module from steering wheel, place airbag
module in plastic bag and seal bag.
12. Transport deployed airbag module to designated
area for incineration.
NOTE: DO NOT transport airbag module in
the vehicle passenger compartment.
13. Scrap all remaining parts of airbag system.
DO NOT re-use or salvage any parts of the
airbag system including steering wheel.
Deployment with module removed from vehicle.
Driver’s Airbag Module
These guidelines are written to aid authorised
personnel to carry out the safe disposal of airbag
modules when removed from the vehicle.
WARNING: Only use the LAND ROVER
approved deployment equipment.
Deploy airbag modules in a well ventilated
designated area.
Ensure airbag module is not damaged or ruptured
before deploying.
1. Carry out deployment tool self test.
2. Remove airbag module from steering wheel.
See driver’s airbag module.
3. Position tool SMD 4082/2 in vice, ensuring that
vice jaws grip tool above bottom flange to
prevent possibility of tool being forced upwards
from vice. Tighten vice.
