Repair Airbag Manual Deployment for 300Tdi Discovery (Page 965)
SUPPLEMENTARY RESTRAINT SYSTEM
19
REPAIR
9. Press both operating buttons to deploy airbag
module.
10. DO NOT return to airbag module for 30 minutes.
11. Using gloves and face mask, remove airbag
module from tool, place airbag module in plastic
bag and seal bag.
12. Wipe down tool with damp cloth.
13. Transport deployed airbag module to designated
area for incineration.
NOTE: DO NOT transport airbag module in
the vehicle passenger compartment. DO
NOT re-use or salvage any parts of the
airbag system including steering wheel or
steering column.
Passenger’s Airbag Module
1. Carry out deployment tool self test.
2. Remove airbag module from fascia.
See
passenger’s airbag module.
3. Position tool SMD 4082/6 in vice, ensuring that
vice jaws grip tool above bottom flange to
prevent possibility of tool being forced upwards
from vice. Tighten vice.
4. Position brackets SMD 4082/7 to tool; lightly
tighten bolts.