300Tdi Discovery
75
SUPPLEMENTARY RESTRAINT SYSTEM
20
REPAIR
5. Position airbag module to tool SMD 4082/6.
Ensure module is correctly secured using all
fixings.
6. Ensure airbag module mounting brackets are
secure.
WARNING: Ensure tool SMD 4082/1 is not
connected to battery.
7. Connect flylead SMD 4082/5 to airbag module.
8. Connect flylead Smd 4082/5 to tool SMD 4082/1
WARNING: Do not lean over module whilst
connecting.
9. Connect tool SMD 4082/1 to battery.
WARNING: Ensure all personnel are
standing at least 15 metres (50 ft) away
from module.