300Tdi Discovery
75
SUPPLEMENTARY RESTRAINT SYSTEM
8
REPAIR
3. Remove 3 screws securing lower half of nacelle
to steering column.
4. Separate the halves of the nacelle and remove
from steering column.
5. Release 2 clips securing rotary coupler to
column switch assembly.
6. Release rotary coupler.
CAUTION: Do not allow rotary coupler to
hang on its harness.
7. Disconnect 4 connectors from column switch
assembly.
8. Remove column switch assembly from steering
column.
Refit
9. Reverse removal procedure.
