Land Rover Workshop Service and Repair Manuals

SUPPLEMENTARY RESTRAINT SYSTEM

13

REPAIR

9. Carefully remove 2 screws securing face plate to

tachometer.

10. Release warning light housing from tachometer

circuit board.

11. Carefully (to avoid damage to tachometer needle

and spindle), tilt and remove warning light
housing.

12. Remove 2 warning light bulbs.

Refit

13. Reverse removal procedure.
14. Fit new warning light bulbs.
15. Carefully fit warning light housing, ensuring that

locating pegs engage correctly and that retaining
clips lock housing into position.

16. Ensure that tachometer needle is on the correct

side of its stop.

17. Fit instrument binnacle.

See ELECTRICAL,

Repair, instrument binnacle.