Discovery I (LJ) V8-4.0L (1996)
WARRANTY CLAIMS:
41.20.50
Time 4.15 hrs.
Replace transfer gearbox input seal
FAULT CODE: X
Normal warranty policy and procedures apply
REPAIR PROCEDURE:
REMOVE TRANSFER GEARBOX
CAUTION:
Ensure that the leak is not transmission oil, clean area and test drive if necessary.
1.
Refer to Workshop Manual, Section 41 for transfer gearbox removal.
2.
Inspect main shaft collar seal track and transfer gearbox face for porosity and damage (see Overhaul Manual LT230).
NOTE:
Use Tool # LRT-37-014 to install new seal.
3.
Replace input seal (see Overhaul Manual LT230).
4.
Reinstall transfer gearbox.
5.
Check transfer gearbox fluid level and top up.
Technical Service Bulletin # 41-02-96
Date: 961231
Transfer Gearbox - Output Shaft Seal Leak
41/02/96/US
12/31/96
SUBJECT
PRIDE - Transfer Gearbox Output Seal Replacement
MODEL
AFFECTED VEHICLES
LP
LH
Discovery
LJ TA531113
Discovery
LJ TA700293
DETAIL
Experience has shown that some transfer gearbox output shaft seals can leak. The procedure that follows describes the installation of improved
seal/flange kits.