Workshop Manuals Factory service & repair Land Rover
01 Introduction02 General information03 Information04 Maintenance05 Engine - K Series06 Engine - L Series07 Emission control08 Engine management system - MEMS09 Engine management system - EDC10 Fuel delivery system11 Cooling system - K Series12 Cooling system - L Series13 Manifold & exhaust systems14 Clutch15 Manual gearbox - PG116 Transfer box - IRD17 Drive shafts18 Rear axle and final drive19 Steering20 Front suspension21 Rear suspension22 Brakes23 Restraint systems24 Body25 Heating & ventilation26 Air conditioning27 Wipers & washers28 Electrical29 Instruments
Land Rover Freelander Workshop Manual (1998-2000)26 · Air conditioning
26 · Heating & A/C

Engine overheat protection (Air conditioning)

Make
Land Rover
Model
Freelander Workshop Manual
Year
1998–2000
Section
Description and operation › Engine overheat protection
Air conditioningEngine overheat protection

Engine overheat protection

If engine coolant temperature reaches 117.5°C (diesel models) or 118°C (petrol models), the ECM switches the air conditioning off to reduce the load on the engine (the indicator lamp in the air conditioning switch remains on). When engine coolant decreases to 115°C (diesel models) or 114°C (petrol models), the ECM switches air conditioning on again.

Fresh/Recirculated air selection

When recirculated air is selected, the amber indicator lamp in the switch illuminates and the recirculated air motor turns the control flap to open the recirculated air inlet and close the fresh air inlet. When fresh air is selected, the amber indicator lamp extinguishes and the recirculated air motor turns the control flap to open the fresh air inlet and close the recirculated air inlet.

Parts & tools for this job For 1998 Land Rover Freelander

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.