Workshop Manuals Factory service & repair Land Rover
Land Rover Freelander Workshop Manual (1998-2000)11 · Cooling system - K Series
11 · Engine

Drain and refill (Cooling system - K Series) (page 2 of 2)

Make
Land Rover
Model
Freelander Workshop Manual
Year
1998–2000
Section
Adjustments
Cooling system - K SeriesDrain and refill · page 2 of 2
  1. Fit expansion tank filler cap.
  2. Fit underbelly panel. See BODY, Exterior fittings.
  3. Start and run engine until radiator cooling fan operates.

CAUTION: If fitted DO NOT operate air conditioning.

  1. Turn heater control to fully hot and ensure that warm air is available at vents.

NOTE: If warm air is not available, an air-lock may be present in heater matrix. If necessary, allow engine to cool, remove expansion tank filler cap and repeat bleed operation at heater hose.

  1. Switch off engine and allow to cool.
  2. Check for leaks and top-up coolant to ’MAX’ mark on expansion tank.
  3. Switch off engine and allow to cool.
  4. Check for leaks and top-up coolant to ’MAX’ mark on expansion tank.

Parts & tools for this job For 1998 Land Rover Freelander

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.