Workshop Manuals Factory service & repair Land Rover
01 Introduction02 General information03 Information04 Maintenance05 Engine - K Series06 Engine - L Series07 Emission control08 Engine management system - MEMS09 Engine management system - EDC10 Fuel delivery system11 Cooling system - K Series12 Cooling system - L Series13 Manifold & exhaust systems14 Clutch15 Manual gearbox - PG116 Transfer box - IRD17 Drive shafts18 Rear axle and final drive19 Steering20 Front suspension21 Rear suspension22 Brakes23 Restraint systems24 Body25 Heating & ventilation26 Air conditioning27 Wipers & washers28 Electrical29 Instruments
Land Rover Freelander Workshop Manual (1998-2000)06 · Engine - L Series
06 · Engine

Engine oil pressure check (Engine - L Series)

Make
Land Rover
Model
Freelander Workshop Manual
Year
1998–2000
Section
Adjustments › Engine oil pressure check
Engine - L SeriesEngine oil pressure check

ENGINE OIL PRESSURE CHECK

Service repair no - 12.90.09/01

Remove

  1. Remove oil pressure switch. See Repairs.

Check

Engine oil pressure check – Remove oil pressure switch. See Repairs.
  1. Top up engine oil if necessary. See MAINTENANCE.
  2. Use pressure check kit LRT-12-052B fit adaptor and gauge to oil pump.
  3. Run engine at idle speed and check for correct oil pressure. See INFORMATION, General data.
  4. Switch off ignition.
  5. Remove pressure gauge and adaptor.
  6. Clean oil spillage.

Refit

  1. Fit oil pressure switch. See Repairs.

Parts & tools for this job For 1998 Land Rover Freelander

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.