Engine - ’k’ series
- Make
- Land Rover
- Model
- Freelander Workshop Manual
- Year
- 1998–2000
- Section
- General data › Engine - ’k’ series
InformationEngine - ’k’ series
ENGINE - ’K’ SERIES
| Type | 16 valve DOHC |
| Cylinder arrangement | 4 in line - transverse |
| Bore | 80.00 mm |
| Stroke | 89.30 mm3 |
| Capacity | 1796 cm |
| Compression ratio (nominal) | 10.5 : 1 |
| Firing order | 1 - 3 - 4 - 2 |
| Height (nominal) | 615 mm |
| Width (nominal) | 600 mm |
| Length (nominal) | 654 mm |
| Rotation | Clockwise, viewed from front of engine |
| Valve operation | Self-adjusting hydraulic tappets |
| Cylinder head warp - maximum | 0.05 mm |
| Emissions Standard | ECD2 (EU2) |
| Maximum Power | 88kW (118 bhp) @ 5550 rpm |
| Maximum torque | 165Nm (223.7 lbf.ft) @ 2750 rpm |
Cylinder head
Cylinder head height:
| New | 118.95 to 119.05 mm |
| Reface limit | 0.20 mm |
Cylinder block
Cylinder liner bore:
| RED grade A | 80.000 to 80.015 mm |
| BLUE grade B | 80.016 to 80.030 mm |
Crankshaft
| Crankshaft end-float | 0.10 to 0.25 mm |
| Service limit | 0.34 mm |
| Thrust washer halves thickness | 2.61 to 2.65 mm |
| Main journal diameter | 47.979 to 48.000 mm |
| Maximum out of round | 0.010 mm |
| Main journal tolerance: | |
| Grade 1 | 47.993 to 48.000 mm |
| Grade 2 | 47.986 to 47.993 mm |
| Grade 3 | 47.979 to 47.986 mm |
| Clearance in bearings | 0.02 to 0.05 mm |
| Big-end journal diameter | 47.986 to 48.007 mm |
| Maximum out of round | 0.010 mm |
| Big end journal tolerance: | |
| Grade A | 48.000 to 48.007 mm |
| Grade B | 47.993 to 48.000 mm |
| Grade C | 47.986 to 47.993 mm |
| Clearance in bearings | 0.021 to 0.049 mm |
| Big-end end-float | 0.10 to 0.25 mm |
Continued.....
Parts & tools for this job For 1998 Land Rover Freelander
- PARTEngine gasket setSearch: Land Rover Freelander 1998 engine gasket set
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLFeeler gauge setSearch: feeler gauge set
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.