Final drive
- Make
- Land Rover
- Model
- Freelander Workshop Manual
- Year
- 1998–2000
- Section
- General data › Final drive
InformationFinal drive
FINAL DRIVE
Ratios:
| 1.8 ’K’ series with MPi | 4.200 : 1 |
| 2.0 ’L’ series | 3.647 : 1 |
Road speed at 1000 rev/min in top gear:
| 1.8 ’K’ series with MPi | 31.7 km/h |
| 2.0 ’L’ series | 36.5 km/h |
HDC speeds:
| Minimum forward | 9.6 km/h |
| Minimum reverse | 6.5 km/h |
19.7 mph 22.7 mph
6.0 mph 4.0 mph
INTERMEDIATE REDUCTION DRIVE
Ratios:
| IRD input shaft to IRD countershaft | 0.828 : 1 |
| IRD countershaft to Front driveshaft | 1.762 : 1 |
| IRD countershaft to Propeller shaft | 0.553 : 1 |
| IRD ratio | 1.458 : 1 |
| Oil cooler | Connected to vehicle cooling system |
REAR AXLE
| Type | Hypoid gear, centreline of drive pinion below centre of ring gear |
| Differential carrier material | Aluminium |
| Ring gear to Pinion Gear: | |
| Backlash tolerance | 0.13 to 0.20 mm |
| Ratios: | |
| Propeller shaft to rear driveshaft | 3.214 : 1 |
Parts & tools for this job For 1998 Land Rover Freelander
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLSocket setSearch: socket set metric
- BOOKHaynes manualSearch: Haynes manual Land Rover Freelander
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.