Valve seats
- Make
- Land Rover
- Model
- Freelander Workshop Manual
- Year
- 1998–2000
- Section
- General data › Valve seats
InformationValve seats
Valve seats
| Valve seat angle - Inlet and Exhaust | 45° |
| Valve seat width - Inlet and Exhaust | 1.5 mm |
| Valve face angle - inlet and Exhaust | 45° |
Lubrication
| System Type | Cast aluminium wet sump; crankshaft driven eccentric rotor oil pump |
| Oil pump: | |
| Outer rotor to housing clearance | 0.28 to 0.36 mm |
| Inner rotor tip clearance | 0.05 to 0.13 mm |
| Rotor end float | 0.02 to 0.06 mm |
| Relief valve spring free length | 38.90 mm2 |
| Minimum oil pressure at idle | 100 kPa (14.5 lbf.in2) |
| Relief valve opening pressure | 410 kPa (59.5 lbf.in )2 |
| Oil pressure warning lamp switch pressure | 20 to 58 kPa (3.0 to 8.5 lbf.in ) |
| Oil filter | Full flow disposable screw-on canister |
Parts & tools for this job For 1998 Land Rover Freelander
- PARTEngine gasket setSearch: Land Rover Freelander 1998 engine gasket set
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLFeeler gauge setSearch: feeler gauge set
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.