Land Rover
Freelander Workshop Manual (1998-2000)
Information
General data
Piston rings
03 · General
Piston rings
Make
Land Rover
Model
Freelander Workshop Manual
Year
1998–2000
Section
General data › Piston rings
Information Piston rings
Piston rings
New ring to groove clearance:
Top compression 0.115 to 0.135 mm 2nd compression 0.050 to 0.082 mm Oil control 0.050 to 0.082 mm
Ring fitted gap on piston:
Top compression 0.30 to 0.50 mm 2nd compression 0.40 to 0.60 mm Oil control 0.25 to 0.50 mm
Ring fitted gap 30mm from top of cylinder bore:
Top compression 0.25 to 0.27 mm 2nd compression 0.40 to 0.42 mm Oil control 0.30 to 0.32 mm
Camshaft
Drive via toothed belt from gear on crankshaft Number of bearings 5 Camshaft maximum end-float 0.51 mm Bearing clearance 0.043 to 0.094 mm Camshaft timing belt tensioner spring free length 65 mm
Tappets
Tappet outside diameter 34.959 to 34.975 mm
Valve springs
Valves
Valve stem diameter:
Inlet 6.907 to 6.923 mm Exhaust 6.897 to 6.913 mm Valve stem to guide clearance: Inlet 0.56 mm Exhaust 0.066 mm Valve face angle 45° to 45°30’ Valve head stand down: Inlet 1.45 mm Exhaust 1.35 mm
Valve guides:
Inside diameter after reaming 6.950 to 6.963 mm Fitted length above cylinder head 61.1 to 61.7 mm
Valve seat inserts
Seat angle:
Inlet 60° Exhaust 58° to 62° Insert diameter: Inlet 35.697 mm Exhaust 31.05 to 31.55 mm
Continued.....
03 General
Parts & tools for this job For 1998 Land Rover Freelander Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.
