Viscous coupling
- Make
- Land Rover
- Model
- Freelander Workshop Manual
- Year
- 1998–2000
- Section
- General data › Viscous coupling
InformationViscous coupling
VISCOUS COUPLING
Rating:
| Max | 440 Nm (325 lbf.ft) @75 rpm |
| Min | 360 Nm (265 lbf.ft) @75 rpm |
STEERING
| Type | Power assisted rack and pinion |
| Steering column | Height adjustable by 3.5° or 30 mm vertical movement of steering wheel |
| Turns - lock to lock: | 3.16 |
| Turning circle | 11.6 m (38.1 ft) kerb to kerb |
NOTE: The following steering geometry settings are given in degrees and minutes, decimal parts of a degree and millimetres. Steering and suspension geometry settings are for a vehicle at unladen weight.
Wheel alignment
Front:
| Camber angle - negative1 | 0° 15’ ± 0° |
| 5 /2 J x 15 wheel | 1.710 mm ± 5.11 mm |
| 6J x 16 wheel | 1.811 mm ± 5.323 mm |
| Castor angle | 3° 30’ ± 1° |
45’ 0.25° ± 0.75°
3.5° ± 1.0°
| 51/2 J x 15 wheel | 21.322 mm ± 6.71 mm |
| 6J x 16 wheel | 24.872 mm ± 7.11 mm |
| King pin inclination1 | 12° 18’ |
| 5 /2 J x 15 wheel | 83.05 mm |
| 6J x 16 wheel | 88.61 mm |
| Front wheel alignment - toe-out - total1 | 0° 20’ ± 0° |
| 5 /2 J x 15 wheel | 2.211 mm ± 0.710 mm |
| 6J x 16 wheel | 2.360 mm ± 1.811 mm |
Rear:
| Camber angle - negative1 | 0° 30’ ± 0° |
| 5 /2 J x 15 wheel | 3.314 mm ± 1.710 mm |
| 6J x 16 wheel | 3.551 ± 1.811 mm |
| Thrust angle1 | 0° 0’ ± 0° 5’ |
| 5 /2 J x 15 wheel | 0 mm ± 0.601 mm |
| 6J x 16 wheel | 0 mm ± 0.611 mm |
| Rear wheel alignment - toe-in - total1 | 0° 20’ ± 0° |
| 5 /2 J x 15 wheel | 2.211 mm ± 1.710 mm |
| 6J x 16 wheel | 2.360 mm ± 1.811 mm |
12.3°
15’ 0.3° ± 0.25°
45’ 0.5° ± 0.75°
0° ± 0.08°
15’ 0.3° ± 0.25°
Parts & tools for this job For 1998 Land Rover Freelander
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLSocket setSearch: socket set metric
- BOOKHaynes manualSearch: Haynes manual Land Rover Freelander
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.