Freelander Service Procedures
BRAKES
REPAIRS
70-7
Hose - rear
$% 70.15.17
Remove
1. Raise rear of vehicle.
WARNING: Do not work on or under a
vehicle supported only by a jack. Always
support the vehicle on safety stands.
2. Remove road wheel.
3. Release clips securing ABS sensor lead to
brake hose.
4. Loosen brake pipe unions to brake hose and
release unions.
CAUTION: Always fit plugs to open
connections to prevent contamination.
5. Remove 2 clips securing hose to valance and
damper bracket.
6. Remove brake hose.
Refit
1. Remove plugs and clean brake pipe male end.
2. Position hose to support brackets and secure
with clips.
3. Align brake pipes and tighten unions to 17 Nm
(12 lbf.ft).
4. Secure ABS sensor lead to brake hose.
5. Bleed brakes.
6. Fit road wheel(s) and tighten nuts to 115 Nm
(85 lbf.ft).
7. Remove stands and lower vehicle.