Freelander Service Procedures
BRAKES
REPAIRS
70-27
Sensor & harness - front wheel - LH
$% 70.65.30
Remove
1. Remove battery carrier.
2. Raise front of vehicle.
WARNING: Do not work on or under a
vehicle supported only by a jack. Always
support the vehicle on safety stands.
3. Remove road wheel.
4. Remove front wheel arch liner.
5. Locate ABS sensor harness on inner wing.
6. Release ABS sensor multiplug from body clip
and disconnect multiplug.
7. Release grommet from wing valance and pull
harness through.
8. Release 2 grommets from wing valance and
damper brackets
9. Release harness from brake hose clips.
10. Remove bolt securing ABS sensor to hub, if
fitted.
11. Release ABS sensor from hub.
12. Remove ABS sensor and harness.
13. Remove bush from front hub.
