Freelander Service Procedures
BRAKES
REPAIRS
70-25
Switch - low fluid level
$% 70.65.06
Remove
1. Disconnect brake fluid level multiplug.
2. Release retaining pin and remove fluid level
switch.
Refit
1. Clean brake fluid level switch.
2. Fit brake fluid level switch.
3. Connect multiplug to brake fluid level switch.
Sensor & harness - front wheel - RH
$% 70.65.29
Remove
1. Raise front of vehicle.
WARNING: Do not work on or under a
vehicle supported only by a jack. Always
support the vehicle on safety stands.
2. Remove road wheel.
3. Remove front wheel arch liner.
4. Locate ABS sensor harness on inner wing.
5. Release ABS sensor multiplug from body clip
and disconnect multiplug.
6. Release grommet from wing valance and pull
harness through.