Freelander Service Procedures
BRAKES
REPAIRS
70-13
Switch - stop light
$% 70.35.42
Remove
1. Disconnect brake light switch multiplug.
2. Release bayonet fitting on brake light switch
and remove switch.
Refit
1. Position switch and secure bayonet fitting.
2. Connect brake light switch multiplug.
3. Depress and hold brake pedal.
4. Reset switch by pulling plunger fully out.
5. Release brake pedal slowly to set switch
adjustment.
Sensor - brake pedal position
$% 70.35.44
Remove
1. Release bayonet fitting on brake light switch
and remove switch.
2. Release sensor from mounting bracket.
3. Disconnect sensor multiplug and remove
sensor.
4. Remove sensor mounting from bracket.
Refit
1. Position sensor to mounting bracket and
connect multiplug.
2. Position switch and secure bayonet fitting.
3. Hold brake pedal depressed and push sensor
fully into bracket, release pedal slowly to set
sensor position.