Freelander Service Procedures
BRAKES
70-12
REPAIRS
Refit
1. Manoeuvre cable into position and secure floor
grommet.
2. Fit and secure handbrake cable to backplate.
3. Fit brake shoes.
BRAKES, REPAIRS, Brake Shoes -
4. Align cable clips, fit bolts and tighten to 22 Nm
(16 lbf.ft).
5. Secure cable in chassis clip.
6. Connect handbrake cable to equalizer.
7. Ensure spring is in place and fit equalizer to
adjusting rod.
8. Fit cable adjusting nut.
9. Fit cable retaining plate, fit bolts and tighten to
22 Nm (16 lbf.ft).
10. Adjust handbrake cable.
11. Fit ash tray and cigar lighter to rear console.
12. Fit road wheel(s).
13. Remove stands and lower vehicle.
Switch - handbrake warning
$% 70.35.40
Remove
1. Remove rear console.
2. Disconnect Lucar from handbrake warning
switch.
3. Release switch from handbrake.
Refit
1. Fit switch to handbrake and connect Lucar.
2. Fit rear console.
