Freelander Service Procedures
EMISSION CONTROL
REPAIRS 17-1-11
Module - tank leakage diagnostic (DMTL)
$% 17.45.41
Remove
1. Disconnect battery earth lead.
2. Remove RH rear wheel arch liner.
3. Release and disconnect pipes from charcoal
canister and DMTL.
CAUTION: Before disconnecting or
removing components, ensure the
immediate area around joint faces and
connections are clean. Plug open
connections to prevent contamination.
4. Remove 2 bolts securing canister support
bracket and release assembly from mounting.
5. Disconnect multiplug from DMTL and remove
canister and valve assembly.
6. Release clip and disconnect hose from DMTL.
CAUTION: Before disconnecting or
removing components, ensure the
immediate area around joint faces and
connections are clean. Plug open
connections to prevent contamination.
7. Remove 3 screws and remove DMTL.
Refit
1. Fit DMTL and secure with screws.
2. Connect hose and secure with clip.
3. Position canister assembly and connect
multiplug.
4. Fit canister assembly to mounting and tighten
bolts to 4 Nm (3 lbf.ft).
5. Connect pipes to DMTL and canister.
6. Fit wheel arch liner.
7. Connect battery earth lead.
