Freelander Service Procedures
ENGINE - K SERIES KV6
12-3-42 REPAIRS
69. Using gearbox bracket bolts, secure LRT-44-
026 lifting bracket to gearbox.
70. Place a wooden block on jack, position jack
under gearbox and raise jack sufficient to
support weight of gearbox. Release lifting hook
from rear engine lifting bracket and connect to
lifting bracket on gearbox.
71. Remove bolt securing upper RH engine steady
to top arm.
72. Loosen bolt securing upper RH engine steady
to body, pivot engine steady away from top
arm.
73. Remove bolt securing PAS pipe to engine front
mounting plate.
74. Remove nut and 4 bolts securing engine top
arm bracket to RH hydramount and to engine
front mounting bracket.
75. Release PAS pipe support bracket from
hydramount and position pipe aside.
76. Remove bolt securing PAS pipe to engine front
mounting plate.
77. Remove top arm.
M12 6605