Freelander Service Procedures
ENGINE MANAGEMENT SYSTEM - SIEMENS
REPAIRS
18-3-5
Engine control module (ECM) - Non NAS
$% 18.30.01
Remove
1. Disconnect battery earth lead.
2. Remove 5 Allen screws securing cover to 'E'
box and remove cover.
3. Release latch and disconnect multiplug from
ECM.
4. Remove ECM from 'E' box.
Refit
1. Fit ECM into 'E' box.
2. Position and connect multiplug to ECM and
secure latch.
3. Fit 'E' box cover and tighten Allen screws to 2
Nm (1.5 lbf.ft).
4. Connect battery earth lead.
M18 0672