Freelander Service Procedures
ENGINE MANAGEMENT SYSTEM - SIEMENS
18-3-6
REPAIRS
Engine control module (ECM) - fuel - NAS
$% 18.30.03
Remove
1. Disconnect battery earth lead.
2. Remove 5 Allen screws and 'E' box cover.
3. Disconnect 5 multiplugs from engine ECM.
4. Release 2 clips and remove ECM.
Refit
1. Fit ECM and connect multiplugs.
2. Fit 'E' box cover and tighten Allen screws to 2
Nm (1.5 lbf.ft).
3. Connect battery earth lead.
4. Initiate ECM using TestBook/T4.
CAUTION: The ECM can only be re-
programmed a maximum of 20 times.
M18 0665