Freelander Service Procedures
ENGINE MANAGEMENT SYSTEM - SIEMENS
18-3-12 REPAIRS
Sensor - camshaft position (CMP)
$% 18.30.24
Remove
1. Disconnect battery earth lead.
2. Remove engine acoustic cover.
ENGINE - K SERIES KV6, REPAIRS,
3. Release CMP multiplug from bracket and
disconnect multiplug.
4. Remove bolt securing CMP sensor multiplug
bracket and release CMP sensor lead from
behind bracket.
5. Remove bolt securing CMP sensor to camshaft
cover.
6. Remove CMP sensor and discard seal.
Refit
1. Clean CMP sensor and mating face.
2. Lubricate new seal with clean engine oil and fit
to CMP sensor.
3. Position CMP sensor, fit and tighten bolt to 8
Nm (6 lbf.ft).
4. Feed CMP sensor lead behind multiplug
bracket, align bracket, fit bolt and tighten to 8
Nm (6 lbf.ft).
5. Connect CMP sensor multiplug and secure to
bracket.
6. Fit engine acoustic cover.
ENGINE - K SERIES KV6, REPAIRS,
7. Connect battery earth lead.