Freelander Service Procedures
EXTERIOR FITTINGS
76-2-16 REPAIRS
Finisher - sill - lower
$% 76.43.28
Remove
1. Raise front of vehicle.
WARNING: Do not work on or under a
vehicle supported only by a jack. Always
support the vehicle on safety stands.
2. Remove both jacking point covers.
3. Remove 7 scrivets securing sill finisher to body.
4. Release and remove finisher from sill.
Refit
1. Clean mating faces of finisher.
2. Position finisher to sill, locate over jacking
points and secure with scrivets.
3. Fit jacking point covers.
4. Remove stands and lower vehicle.