Freelander Service Procedures
FRONT SUSPENSION
REPAIRS
60-13
Rear beam
$% 60.35.23
Remove
1. Remove underbelly panel.
2. Remove bolt securing engine lower steady to
beam.
3. Remove 4 bolts securing anti-roll bar saddle
clamps to beam.
4. Support anti-roll bar.
5. Loosen nuts securing lower arm rear
mountings.
6. Remove 2 bolts securing each lower arm rear
bush housing.
7. Remove lower arm pivot bush bolts.
8. Release lower arms from beam.
9. Support beam and remove 2 remaining bolts
securing beam.
10. Lower and remove beam.