Freelander Service Procedures
INTERIOR TRIM COMPONENTS
76-3-18 REPAIRS
Refit
1. Fit fascia and coin tray mats.
2. Fit immobilisation ECU to fascia and secure
with nuts.
3. Connect multiplug to immobilisation ECU.
4. Fit switch blank.
5. Fit glove box locks to fascia and secure with
screws.
6. Fit glove box and secure with screws.
7. Fit glove box lamp and mat.
8. Fit glove box lids and secure hinge pins.
9. Fit face level vents and seals to fascia.
10. Fit centre bracket and secure with screws.
11. Models without passenger airbag: Fit grab
handle and secure with nuts.
12. Fit instrument pack lower cover and secure with
screws.
13. Fit instrument pack to fascia and secure with
screws.
14. Fit fascia harness to fascia and secure with
clips.
15. Connect Lucars to glove box lamp and switch.
16. Connect multiplugs to mirror switch and
headlamp levelling switch.
17. Fit mirror switch and headlamp levelling switch.
18. Connect multiplugs to instrument pack.
19. Fit instrument pack upper cover and secure
with screws.
20. Connect multiplugs to switches on instrument
bezel finisher, fit bezel and secure with screws.
21. With assistance fit fascia to vehicle and secure
with bolts.
22. Connect fascia harness multiplugs to main
harness.
23. Models with passenger airbag: Fit passenger
Air bag - fascia - passenger - up to 04MY.
24. Models without passenger airbag: Fit fascia
REPAIRS, Stowage box - fascia.
25. Fit 'A' post upper trim finishers.
REPAIRS, Trim finisher - 'A' post - upper -
renew.
26. Fit clock.
27. Open drivers glove box lid and remove fuse box
cover.
28. Connect multiplugs to fusebox.
29. Fit fusebox cover and close glove box lid.
30. Fit steering column lower cover and secure with
screws.
31. Fit wiper/indicator switch and tighten clamping
screw.
32. Connect multiplugs to wiper/indicator switch.
33. Fit rotary coupler.
Rotary coupler - (SRS) air bag system.
34. Fit front console.
