Freelander Service Procedures
INTERMEDIATE REDUCTION DRIVE
41-24
REPAIRS
Seal - drive shaft - LH - K1.8
$% 41.29.08
Remove
1. Remove LH drive shaft.
2. Carefully remove oil seal from differential
housing, discard oil seal.
Refit
1. Thoroughly clean oil seal recess in differential
housing, splines and oil seal running surface on
drive shaft.
2. Fit handle LRT-37-027 into seal replacer
adaptor, LRT-37-032.
3. Position new oil seal onto LRT-37-032 with
sealing lip facing towards differential housing.
4. Carefully drift oil seal into housing until fully
seated in recess.
5. Fully insert oil seal protector tool, Unipart TRV
100060, into differential oil seal so that oil seal
lip is protected and that the split end of tool is
butted correctly.
6. Fit LH drive shaft.