Freelander Service Procedures
RESTRAINT SYSTEMS
75-4
REPAIRS
8. Release cover and pad from frame.
9. Remove Torx bolt from centre seat belt anchor
and right seat belt buckle.
10. Remove seat belt and right seat belt buckle.
Refit
1. Position centre seat belt anchor and right seat
belt buckle to seat and tighten Torx bolt to 32
Nm (24 lbf.ft).
2. Fit cover and pad to frame.
3. Fit front and sides of cushion cover to frame.
4. Fit rear of cushion cover to frame.
5. Fit cushion to squab and tighten Torx bolts.
6. Fit end covers and tighten screws.
7. Position seat belt reel in seat squab and tighten
nut to 32 Nm (24 lbf.ft).
8. Fit seat belt reel cover and tighten screws.
9. Fit rear seat.
SEATS, REPAIRS, Rear seat - RH.
Seat belt - rear - LH
$% 76.73.23
Remove
1. Remove rear quarter upper trim casing.
REPAIRS, Trim casing - rear quarter - upper
- 5 door.
2. Remove Torx bolt from seat belt upper
mounting.
3. Remove Torx bolt from seat belt reel and
remove reel.
Refit
1. Position reel and tighten Torx bolt to 50 Nm (37
lbf.ft).
2. Extend belt, position top mounting and tighten
Torx bolt to 32 Nm (24 lbf.ft).
3. Fit rear quarter upper trim casing.