Freelander Service Procedures
SEATS
76-5-8
REPAIRS
9. Remove cover and pad from frame.
10. Remove and discard 13 hog rings and remove
cover from pad.
Refit
1. Position cushion cover to pad and secure with
hog rings.
2. Fit cover to pad.
3. Position and secure cushion cover and pad to
frame.
4. Fit cushion to squab and tighten Torx bolts to
28 Nm (21 lbf.ft).
5. Position back board and secure to frame.
6. Fit end covers and tighten screws.
7. Position rear seat console and secure with
screws.
8. Position console cover and secure with screws.
9. Fit rear seat.
SEATS, REPAIRS, Cushion & squab
- rear seat - bench type - 3 door.
Finisher - seat base - front - each
$% 78.55.01
Remove
1. Remove front seat cushion side finisher.
2. Release cover to access Torx screw under
front seat and remove Torx screw.
3. Remove 2 Torx screws securing finisher to seat
runner.
4. Remove finisher.
Refit
1. Position finisher to seat runner.
2. Fit and tighten Torx screws.
3. Fit and tighten Torx screw under front seat and
close cover.
4. Fit front seat cushion side finisher.