Freelander Service Procedures
SECURITY
86-4-2
REPAIRS
Switch/push - horn
$% 86.30.01
Remove
1. Remove airbag module from steering wheel.
2. Release horn switch multiplugs and leads from
steering wheel base.
3. Disconnect multiplug from rotary coupler.
4. Using a broad round edged tool, carefully prise
horn switch from steering wheel.
5. Noting fitted position disconnect 2 Lucars and
remove horn switch.
Refit
1. Position horn switch and connect Lucars.
2. Carefully fit horn switch to steering wheel.
3. Connect multiplug to rotary coupler.
4. Secure leads and multiplug to base of steering
wheel.
5. Fit airbag to steering wheel.
Horn
$% 86.30.10
Remove
1. Remove bolt securing horn to body.
2. Disconnect multiplug from horn and remove
horn.
NOTE: Do not carry out further dismantling if
component is removed for access only.
3. Remove nut securing bracket to horn and
remove bracket.
Refit
1. Fit bracket to horn and secure with nut.
2. Connect multiplug to horn.
3. Fit horn to body and secure with bolt.