Module (ECU) - Volumetric Alarm System - 5 Door - Sunroof
SECURITY
REPAIRS
86-4-9
12. Remove 2 trim studs securing centre of
headlining.
13. Release 8 clips securing both 'B/C' post upper
finishers and pull finishers clear of headlining.
14. Carefully lower headlining to gain access to
volumetric sensor.
15. Disconnect multiplug from volumetric sensor.
16. Remove 2 screws securing volumetric sensor
and remove sensor.
Refit
1. Fit volumetric sensor and secure with screws.
2. Connect multiplug to sensor.
3. Secure the headlining with trim studs.
4. Position 'B/C' post upper finisher and secure
with clips.
5. Fit sun visors.
6. Fit 'A' post upper finishers.
REPAIRS, Trim finisher - 'A' post - upper -
renew.
7. Fit grab handles, tighten screws and fit screw
covers.
8. Fit grab handle blanking plugs.
9. Up to 04MY: Position front interior lamp and
connect multiplug.
10. Up to 04MY: Fit Torx bolts securing interior
lamp and tighten to 6 Nm (4.4 lbf.ft).
11. Up to 04MY: Fit lens to front interior lamp.
12. From 04MY: Position front interior lamp and
connect multiplug.
13. From 04MY: Fit and secure front interior lamp
to headlining.
14. Position and secure sun roof finisher.
15. Secure front and rear door seals.
