Freelander Service Procedures
SECURITY
86-4-4
REPAIRS
4. Release door aperture seals to release
headlining.
5. Release 3 studs securing rear edge of
headlining to roof panel.
6. Remove 4 screws securing headlining to 'B'
posts.
7. Release 2 studs securing sides of headlining to
body.
8. Lower front edge of headlining.
9. Release sun roof seal.
10. Remove 2 screws from volumetric sensor.
11. Disconnect multiplug from volumetric sensor
and remove.
Refit
1. Position volumetric sensor and connect
multiplug.
2. Fit sensor and secure with screws.
3. Fit headlining to 'B' posts and secure with
screws.
4. Secure headlining behind rear vent rubbers.
5. Fit headlining rear finisher.
6. Fit door aperture seals.
7. Fit headlining to sun roof seal.
8. Position roof lamp and connect multiplug.
9. Fit roof lamp and secure with screws.
10. Fit lens to roof lamp.