Freelander Service Procedures
STEERING
57-16
REPAIRS
Nacelle - column
$% 57.40.29
Remove
1. Remove key from starter switch.
2. Carefully remove upper half of nacelle. Take
care when releasing clips from lower half of
nacelle.
3. Remove 2 screws securing lower nacelle to
steering column.
4. Lower steering column tilt lever.
5. Carefully remove cover from starter switch
being careful not to damage the passive coil.
6. Carefully pull lower half of nacelle from
retaining clip on column lock
Refit
1. Ensure that the steering column tilt lever is
lowered.
2. Position lower half of nacelle and engage with
clip on column lock.
3. Raise column tilt lever.
4. Fit and tighten 2 screws securing lower half of
nacelle to steering column.
5. Fit cover to starter switch.
6. Fit upper half of nacelle and ensure that clips
engage with lower half.